Tri Tool Series 500 - Qualitas Technology Limited - United Kingdom Website
Main menu:
Tri Tool Series 500
SEVERMASTER® 500 Series
Tube Severing Machines
Tri Tool's tube severing machines feature an advanced auto-cycling and quick-release collet system that provides the fastest cut-to-cut cycle time of any portable severing machine on the market.
With their optional squaring module, this results in a perfect prep solution for orbital welding.
The TRI TOOL Series 500 Range of Tube and Pipe Preparation Equipment - Everything you need to Cut, Bevel, Counter-bore and more - from the worlds leader, designed and manufactured in USA
Model 572AC
Tube Severing Machine
Severs 1/4" (6.35mm) to 2" (50.80MM) diameter tubes and thin wall pipe.
• Perfect alternative to pipe saws that generate particulate contamination
• Full contact OD collets clamp without damage or disortion
• Auto Cycle tool bit control
• Produces easily collectable ribbon-like chips
• Won't contaminate ID
• Gear driven powerhead rotates on precision cross roller bearing
• Single lever collet actuation
• Fully enclosed gears for operator safety
• Lightweight and compact
The Model 572AC SEVERMASTER™ severs 1/4" (6.35mm) to 2" (50.80MM) diameter tubes and thin wall pipe.
This machine enhances productivity by incorporation of the auto-cycle tool model and quick lock collet closure. A cam cycle tool bit feed mechanism automatically returns the tool bit to the home position ready to start the next cut. The tool module also allows setting the start and finish cut positions to minimize the cycle time. The feed increment per revolution is adjustable to optimize the cutting speed relative to the material. A variable speed motor provides further cutting speed control for increased tool bit life and ID burr reduction. The quick Lock mechanism actuates the collet with a single lever stroke for simple collet changes.
Tool bit options are available to minimize the burr on the mounting side or the drop-off side of the sever line and in different edge widths to match the tube wall thickness. The tool also incorporates mounting features to allow use of an SQM-1AC Tube Squaring Module for optimum burr free ends.
The Model 572AC Severmaster System consists of the mainframe with quick Lock collet closure, Auto Cycle tool Module with adjustable depth of feed from .001" to .005" (.02mm to .13mm) per revolution, drive motor, wrench kit, operators manual and carrying case.
Model 576AC
Tube Severing Machine
severs 2" (50.8mm) to 6.63" (168.3mm) diameter tubes and thin wall pipe
• Auto Cycle tool bit control
• Perfect alternative to pipe saws that generate particulate contamination
• Full contact OD collets
• Produces easily collectable ribbon-like chips
• Optional squaring module
• Compact and portable
The Model 576AC SEVERMASTER severs 2" (50.8mm) to 6.63" (168.3mm) diameter tubes and thin wall pipe. The severing range can be extended down to 3/4" tube by using a special extended tool holder. The Model 576AC features our Auto-Cycling, cam-operated tool bit feed mechanism which automatically returns the tool bit to the home position (ready to start the next cut). The bit feed increment is adjustable to match the material being cut. The Model 576AC has a collet clamping length of 3.00" (76.2mm).
A variable speed motor provides cutting speed control for maximum bit life and ID burr reduction. The Quick Lock mechinism actuates the clamping collet with a single lever stroke and allows for rapid collet change.
The Model 576AC comes complete with one block module, baseplate, tool kit, operator's manual and a tool kit.
